Agilent Technologies N9360A Programming Manual page 43

N9360A Multi UE Tester CDMA2000 Programming Manual
9
Read the Peak TX Power test results, for example:
<Send Query Command to the Tester>
TEST:MAN:RES:TXP?
<Display Message on the PC> Peak TX Power :<Value 3>
dBm
<Display Message on the PC>
If the <Value 2> is not 0, Message is FAIL.
Else, Message is PASS.
10
Start the BS Release, for example:
<Send Command to the Tester> TEST:MAN:BSR
<Send Query Command to the Tester>
TEST:MAN:SIGN:STAT?
If the Response is not
Else, complete the test.
Programming Command Guidelines
, re send the query.
16
4
4-15