Agilent Technologies N9360A Programming Manual page 62

5
Programming Command Reference
5-12
• W00 option is required to be installed in the Tester to boot
W-CDMA.
• C00 and C01 options are required to be installed in the
Tester to boot cdma2000.
The duration time is within the ranges from 10 to 60 seconds in
1 step. At preset, these settings are NONE and 0, which means
the Tester does not start automatic boot and the display shows
the [Top Menu] screen. If 0 is set other than NONE, an execution
error occurs.
This query command returns the settings of application name
and the duration time. When this command is set to NONE, it
returns 0.
RF-CPU Revision
CONFigure:REVision:RF?
This query command returns the firmware revision of RF-CPU
with a string xx.xx.
N9360A Multi UE Tester CDMA2000 Programming Manual