Agilent Technologies N9360A Programming Manual page 107

N9360A Multi UE Tester CDMA2000 Programming Manual
System ID (Zone-based Registration)
CONFigure:CONDition:RSID <int>
CONFigure:CONDition:RSID?
This command is valid when CDMA mode is set to MC1X. This
sets the System ID (Zone-based Registration) of Base Station
Parameter in each band set by the
The allowable range is from 0 to 32767 in 1 steps. At preset,
this is set to 12.
This query command returns the set System ID (Zone-based
Registration) with integer. The range of the value is same as that
of the command parameter.
Power Up Registration
CONFigure:CONDition:PURegister ON|OFF|1|0
CONFigure:CONDition:PURegister?
This command is valid when CDMA mode is set to MC1X. This
sets whether to enable the Power Up Registration function in each
band set by the Band
(1) or OFF (0). At preset, this is set to "0".
This query command returns the set Power Up Registration with
the value of 1 or 0.
Max Slot Cycle Index
CONFigure:CONDition:MSCindex <int>
CONFigure:CONDition:MSCindex?
This command is valid when CDMA mode is set to MC1X. This
sets the Max Slot Cycle Index in each band set by the
36. The allowable range is from 0 to 7 in 1
command on page
steps. At preset, this is set to 0.
This query command returns the set Max Slot Cycle Index with
integer. The range of the value is same as that of the command
parameter.
Programming Command Reference
Band command on
36. The parameter is ON
command on page
5
page 36.
Band
5-57