Agilent Technologies N9360A Programming Manual page 83

N9360A Multi UE Tester CDMA2000 Programming Manual
<string>, ranging from 1.0.0.1 to 223.255.255.255. But,
from 192.168.1.1 to 192.168.1.1255 are unavailable for
the IP address to use because the Tester uses them internally.
This query command returns ACT and the setting of default
gateway address when <enum> is set to ACT. This returns NONE
only when <enum> is set to NONE.
Setting 1 to 5 Gateway Address
CONFigure:NETwork:GATEway:SET1 <enum 1>,
<string 1>,<enum 2>,<string 2>
CONFigure:NETwork:GATEway:SET1?
CONFigure:NETwork:GATEway:SET2 <enum 1>,
<string 1>,<enum 2>,<string 2>
CONFigure:NETwork:GATEway:SET2?
CONFigure:NETwork:GATEway:SET3 <enum 1>,
<string 1>,<enum 2>,<string 2>
CONFigure:NETwork:GATEway:SET3?
CONFigure:NETwork:GATEway:SET4 <enum 1>,
<string 1>,<enum 2>,<string 2>
CONFigure:NETwork:GATEway:SET4?
CONFigure:NETwork:GATEway:SET5 <enum 1>,
<string 1>,<enum 2>,<string 2>
CONFigure:NETwork:GATEway:SET5?
These commands set the gateway addresses for Setting 1 to
Setting 5. <enum 1> sets whether to enable the gateway
address for Setting 1 to Setting 5. The parameter is ACT (for
enabling) or NONE (for disabling). <string 1> specifies the
Host/Net address. When <enum 2> is set to NONE, <string 1>
is recognized as the Host address addressed to a Host. When
<enum2> is set to other than NONE, <string 1> is recognized
as the Net address addressed to subnet.
<enum2> selects Host (NONE) or Net (other than NONE). When Net
is selected, the value of subnet mask is in the CIDR form,
ranging from 1 to 31.
<string2> specifies the gateway address.
Programming Command Reference
5
5-33