5
Programming Command Reference
This command sets whether to execute the Frequency Error
measurement. The parameter is ON (1) or OFF (0). At preset,
this is set to 1.
This query command returns the setting of the Frequency Error
measurement with integer value of 1 or 0. The meaning of the
return value is same as that of the command parameter.
Multi-code Rho
TXANalyzer:MRHO:STATe ON|OFF|1|0
TXANalyzer:MRHO:STATe?
This command sets whether to execute the Multi-code Rho
measurement. The parameter is ON (1) or OFF (0). At preset,
this is set to 1.
This query command returns the setting of the Multi-code Rho
measurement with integer value of 1 or 0. The meaning of the
return value is same as that of the command parameter.
Time Offset
TXANalyzer:TOFFset:STATe ON|OFF|1|0
TXANalyzer:TOFFset:STATe?
This command sets whether to execute the Time Offset
measurement. The parameter is ON (1) or OFF (0). At preset,
this is set to 1.
This query command returns the setting of the Time Offset
measurement with integer value of 1 or 0. The meaning of the
return value is same as that of the command parameter.
Code Domain Power TX Power
TXANalyzer:CDPWr:TXPower:STATe?
This query command returns the settings (execution or
inexecution) of the Code Domain Power TX Power test. Only query
is available since the settings is fixed to ON when either
measurement item other than TX Power is set to ON and fixed to
OFF when all measurement items other than TX Power are set
to OFF.
N9360A Multi UE Tester CDMA2000 Programming Manual
5-143