5
Programming Command Reference
Test Sequence Screen
DISPlay:CONFigure:SEQuence
This command selects the [Configuration: Test Sequence]
screen. The parameters and controls on this screen set the test
sequence of Automatic Test.
File Management Screen
DISPlay:CONFigure:FILE
This command selects the [Configuration: File Management]
screen. The files containing test setup files for all function
modes are saved to the HDD or a USB memory device. Also,
these files are recalled or deleted from the HDD or the USB
memory device.
Network Setting Screen
DISPlay:CONFigure:NETwork
This command selects the [Configuration: Network Setting]
screen.
N9360A Multi UE Tester CDMA2000 Programming Manual
5-27