Agilent Technologies N9360A Programming Manual page 67

N9360A Multi UE Tester CDMA2000 Programming Manual
• <string 1> (32 letters) is the version number of archeve.
• <string 2> (4 letters) is the result code of update. If update is
a failure, it is equivalent to the error code. If update is a
success, it is "0000".
• USB|HDD|SERVER is the update type.
Update History Position
UPDAte:HISTory:POSition <int>
UPDAte:HISTory:POSition?
This command sets the read-out starting position of the history
of update result read by UPDAte:HISTory?. The allowable range
is from 1 to 2147483647 in 1 steps. However, actually the
number of the maximum read-out histories is 250. If 251 or
more values are set up, the read-out result of UPDAte:HISTory?
is 0. At preset, this is set to 1.
This query command returns the read-out starting position of
the history of update result setting with integer. The range of
this values is same as that of the command parameter.
Update History Request Number
UPDAte:HISTory:REQuest:NUMber <int>
UPDAte:HISTory:REQuest:NUMber?
This command set the read-out number of the update result
history read by UPDate:HISTory?. The allowable range is from 1
to 58 in 1 steps. At preset, this is set to 10.
This query command returns the read-out number of the update
result history with integer. The range of this values is same as
that of the command parameter.
Update History Number
UPDAte:HISTory:NUMber?
This query command returns the total number of the existing
update history.
Programming Command Reference
5
5-17