Agilent Technologies N9360A Programming Manual page 74

5
Programming Command Reference
5-24
Initial Screen
DISPlay:INIT
This command selects the [Initial] screen to activate one of the
function modes.
Display Mode
DISPlay:MODE FAST|TRACk
DISPlay:MODE?
This command sets the display mode. FAST is fast mode, TRACk
is normal mode. It cannot set up during testing of Automatic
Test, signaling and mesurement state of Manual Test, and
measurement state of Tx Analyzer. If FAST mode is specified,
since renewal of a screen is not performed, it usually operates
earlier than normal mode. In order to cancel FAST mode, it is
canceled by send TRACk by this command or pressing the soft
key [Local]. At preset, this is set to TRACk.
This query command returns the display mode (FAST of TRACk)
setting with strings.
N9360A Multi UE Tester CDMA2000 Programming Manual