Agilent Technologies N9360A Programming Manual page 105

N9360A Multi UE Tester CDMA2000 Programming Manual
Band
CONFigure:CONDition:BAND <<
BAND0:CELUS|BAND3:CELJP|BAND1:PCSUS|<<
BAND4:PCSKR|BAND6:IMT-2K
CONFigure:CONDition:BAND?
This command sets the Band. The parameter is BAND0:CELUS,
BAND3:CELJP, BAND1:PCSUS, BAND4:PCSKR or
BAND6:IMT-2K. At preset, this is set to BAND0:CELUS.
This query command returns the setting of Band.
Mobile Country Code
CONFigure:CONDition:MCC <int>
CONFigure:CONDition:MCC?
This command is valid when CDMA mode is set to MC1X. This
sets the Mobile Country Code of Base Station Parameter. The
allowable range is from 0 to 999 in 1 steps. At preset, this is set
to 111.
This query command returns the set Mobile Country Code with
integer. The range of the value is same as that of the command
parameter.
Mobile Network Code
CONFigure:CONDition:MNC <int>
CONFigure:CONDition:MNC?
This command is valid when CDMA mode is set to MC1X. This
sets the Mobile Network Code of Base Station Parameter. The
allowable range is from 0 to 99 in 1 steps. At preset, this is set
to 11.
This query command returns the set Mobile Network Code with
integer. The range of the value is same as that of the command
parameter.
Programming Command Reference
5
5-55