Agilent Technologies N9360A Programming Manual page 143

N9360A Multi UE Tester CDMA2000 Programming Manual
• <real 3> (up to 6 letters) is the measured data ranging
from -99.99 to +99.99 in dB. If measurement result is out
of range or the Inner Loop Power (Down) is not measured, the
value -99.99 is returned.
Inner Loop Power (Up) Measurement
TESTs:AUTO:RESults:INNErpower1:Up?
TESTs:AUTO:RESults:INNErpower2:Up?
TESTs:AUTO:RESults:INNErpower3:Up?
TESTs:AUTO:RESults:INNErpower4:Up?
TESTs:AUTO:RESults:INNErpower5:Up?
TESTs:AUTO:RESults:INNErpower6:Up?
These query commands return the Inner Loop Power (Up)
Measurement result values, <int 1>, <int 2> and <real 3>, for each
channel.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or the Inner Loop Power (Up) is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from -99.99 to +99.99 in dB. If measurement result is out
of range or the Inner Loop Power (Up) is not measured, the
value -99.99 is returned.
Max TX Power Measurement
TESTs:AUTO:RESults:TPOWer1?
TESTs:AUTO:RESults:TPOWer2?
TESTs:AUTO:RESults:TPOWer3?
TESTs:AUTO:RESults:TPOWer4?
TESTs:AUTO:RESults:TPOWer5?
TESTs:AUTO:RESults:TPOWer6?
This query commands return the Max TX Power Measurement
result values, <int 1>, <int 2> and <real 3>, for each
channel.
Programming Command Reference
5
5-93