Agilent Technologies N9360A Programming Manual page 112

5
Programming Command Reference
5-62
Table 5-13SCH Encoder Allowable Range and Preset Value
Radio Configuration SCH Data Rate (kbps) Allowable Range
F3R3, F4R3 9.6
19.2, 38.4, 76.8, 153.6
F5R4 14.4
28.8, 57.6, 115.2, 230.4 CONV,TURB
When the SCH Rate is set to either 9.6 kbps (for F3R3 and F4R3)
or14.4 kbps (for F5R4), only query command is available as the
SCH Encoder type is fixed to CONV.
This query command returns the set SCH Encoder type.
SCH Level
CONFigure:CONDition:SCH:LEVel <real>
CONFigure:CONDition:SCH:LEVel?
This command is valid when CDMA mode is set to MC1X. This
sets the SCH Level when F3R3, F4R3, or F5R4 is set by the Radio
Configuration command. The allowable range is from -20.00 to
-2.50 in 0.25 steps. At preset, this is set to -3.50.
This query command returns the setting of the SCH Level with
real.
Radio Configuration
CONFigure:CONDition:RCONfig <<
F1R1|F2R2|F3R3|F4R3|F5R4
CONFigure:CONDition:RCONfig?
This command is valid when CDMA mode is set to MC1X. This
sets the Radio Configuration. The parameter is F1R1, F2R2, F3R3,
F4R3, or F5R4. At preset, this is set to F1R1.
This query command returns the setting of the Radio
Configuration.
N9360A Multi UE Tester CDMA2000 Programming Manual
Preset Value
CONV CONV
CONV,TURB CONV
CONV CONV
CONV