Agilent Technologies N9360A Programming Manual page 106

5
Programming Command Reference
5-56
Network ID
CONFigure:CONDition:NID <int>
CONFigure:CONDition:NID?
This command is valid when CDMA mode is set to MC1X. This
sets the Network ID of Base Station Parameter in each band set
by the Band command on
to 65535 in 1 steps. At preset, this is set to 1.
This query command returns the set Network ID with integer.
The range of the value is same as that of the command
parameter.
System ID
CONFigure:CONDition:SID <int>
CONFigure:CONDition:SID?
This command is valid when CDMA mode is set to MC1X. This
sets the System ID of Base Station Parameter in each band set by
the Band command on
32767 in 1 steps. At preset, this is set to 7.
This query command returns the set System ID with integer. The
range of the value is same as that of the command parameter.
Network ID (Zone-based Registration)
CONFigure:CONDition:RNID <int>
CONFigure:CONDition:RNID?
This command is valid when CDMA mode is set to MC1X. This
sets the Network ID (Zone-based Registration) of Base Station
Parameter in each band set by the
The allowable range is from 0 to 65535 in 1 steps. At preset,
this is set to 12.
This query command returns the set Network ID (Zone-based
Registration) with integer. The range of the value is same as that
of the command parameter.
N9360A Multi UE Tester CDMA2000 Programming Manual
36. The allowable range is from 0
page
36. The allowable range is from 0 to
page
Band command on page 36.