Agilent Technologies N9360A Programming Manual page 168

5
Programming Command Reference
5-118
Connection Close
TESTs:MANual:CLOSe:CONNect
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
executes the Connection Close to the mobile phone from the
Tester.
Session Close
TESTs:MANual:CLOSe:SESSion
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
executes the Session Close to the mobile phone from the Tester.
Softer Handoff
TESTs:MANual:SHOFf
This command executes the Softer Handoff to the mobile phone
from the Tester.
MAX/MIN TX Power
TESTs:MANual:MMPower
This command executes the MAX/MIN Power to the mobile
phone from the Tester.
RX Power
TESTs:MANual:RXPower:MEASure
This command is valid when CDMA mode is set to MC1X.This
command executes the RX Power to the mobile phone from the
Tester.
MS Answer
TESTs:MANual:MSAnswer
N9360A Multi UE Tester CDMA2000 Programming Manual