Agilent Technologies N9360A Programming Manual page 195

N9360A Multi UE Tester CDMA2000 Programming Manual
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or TX Power is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from -99.99 to +99.99 in dBm. If measurement range is
out of range or TX Power is not measured, the value 99.99 is
returned.
Frequency Error Measurement
TXANalyzer:RESults:FERRor?
This query command returns the Frequency Error Measurement
result values, <int 1>, <int 2>, and <real 3>. Each value is
separated by a comma.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement range is out of
range or Frequency Error is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
(Judgement of limit value is not executed.)
• <real 3> (up to 8 letters) is the measured data ranging
from -10000.0 to +10000.0 in Hz. If measurement result is
out of range or Frequency Error is not measured, the value
99999.9 is returned.
Multi-code Rho Measurement
TXANalyzer:RESults:MRHO?
This query command returns the Multi-code Rho Measurement
result values, <int 1>, <int 2>, and <real 3>. Each value is
separated by a comma.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement range is out of
range or Multi-code Rho is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 5 letters) is the measured data ranging
from 0.800 to 1.000. If measurement result is out of range
or Multi-code Rho is not measured, the value 9.999 is
returned.
Programming Command Reference
5
5-145