Agilent Technologies N9360A Programming Manual page 179

N9360A Multi UE Tester CDMA2000 Programming Manual
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Sensitivity/FER is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 7 letters) is the measured data ranging
from 0.00 to -100.00 in %. If measurement result is out of
range or Sensitivity/FER is not measured, the value 999.9 is
returned.
• <int 4> (up to 8 letters) is the Error Count ranging from 0
to 10000000. If measurement result is out of range or
Sensitivity/FER is not measured, the value 99999999 is
returned.
• <int 5> (up to 8 letters) is the Frame Count ranging from 1
to 10000000. If measurement result is out of range or
Sensitivity/FER is not measured, the value 99999999 is
returned.
Sensitivity/PER Measurement
TESTs:MANual:RESults:PER?
This command requires the installation of the Option C02.
This query command is valid when CDMA mode is set to EVDO.
This returns the Sensitivity/PER Measurement result values,
<int 1>, <int 2>, <int 3>, <int 4>, and <real 5>.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Sensitivity/PER is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging
from 0.00 to 100.00 in %. If measurement result is out of
range or Sensitivity/PER is not measured, the value 999.99
is returned.
• <int 4> (up to 8 letters) is the Error Count ranging from 0
to 10000000. If measurement result is out of range or
Sensitivity/PER is not measured, the value 99999999 is
returned.
• <int 5> (up to 8 letters) is the Packet Count ranging from 1
to 10000000. If measurement result is out of range or
Sensitivity/PER is not measured, the value 99999999 is
returned.
Programming Command Reference
5
5-129