Agilent Technologies N9360A Programming Manual page 61

N9360A Multi UE Tester CDMA2000 Programming Manual
Date
CONFigure:DATE <int YYYY>,<int MM>,<int DD>
CONFigure:DATE?
This command sets the date of the calendar in the Tester. <int
YYYY> is year within the range from 1990 to 2037, <int MM>
is month within the range from 1 to 12, and <int DD> is day
within the range from 1 to 31.
This query command returns the date of the calendar in the
Tester with <int YYYY>, <int MM> and <int DD>. The range
of these values is same as that of the command parameter.
Time
CONFigure:TIME <int HH>,<int MM>
CONFigure:TIME?
This command sets the time of the clock in the Tester. <int
HH> is hour within the range from 0 to 23 and <int MM> is
minutes within the range from 0 to 59.
This query command returns the time of the clock in the Tester
with <int HH> and <int MM>. The range of these values is
same as that of the command parameter.
Autoboot
CONFigure:AUTOBoot NONE|GSM|WCDMA|CDMA2000,
<int>
CONFigure:AUTOBoot?
This command selects Autoboot setting from NONE, GSM or
WCDMA, and CDMA2000, that is automatically activated in a
certain period of time after the Menu screen is displayed, and
<int> sets the duration time (unit: second) until start of
automatic boot.
• If this is set to NONE, the Tester does not start automatically.
• If this is set to GSM or WCDMA,or CDMA2000 the Tester starts
automatic boot with the GSM application, W-CDMA or the
cdma2000 application, respectively.
• G00 option is required to be installed in the Tester to boot
GSM.
Programming Command Reference
5
5-11