Agilent Technologies N9360A Programming Manual page 104

5
Programming Command Reference
Command Reference for Configuration: Test Condition Screen
5-54
The Condition commands are used to set the controls and
parameters associated with the test condition including the
pass or fail test limits for Automatic Test and Manual Test. The
query commands return the settings of those controls and
parameters.
Current System
CONFigure:CONDition:CURrentsystem
GSM|WCDMA|CDMA2000
CONFigure:CONDition:CURrentsystem?
This command sets the system to be operated. The parameter is
GSM for GSM system setting screen, WCDMA for W-CDMA system
setting screen, or CDMA2000 for cdma2000 system setting
screen. Setting in GSM is valid when preinstalled option is
installed in the Tester and setting in WCDMA is valid when
preinstalled option is installed. At preset, this is set to
CDMA2000. However, the system specified at starting (MENU
application.
This query command returns the setting of system being
operated.
CDMA Mode
CONFigure:CONDition:CDMAMODe MC1X|EVDO
CONFigure:CONDition:CDMAMODe?
This command sets the cdma2000 mode. The parameter is MC1X
or EVDO. At preset, this is set to MC1X.
This query command returns the setting of cdma2000 mode.
N9360A Multi UE Tester CDMA2000 Programming Manual