Agilent Technologies N9360A Programming Manual page 203

N9360A Multi UE Tester CDMA2000 Programming Manual
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Code Power is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging
from -40.0 to 0.0 in dB. If measurement result is out of
range or Code Power is not measured, the value 99.9 is
returned.
Programming Command Reference
5
5-153