Agilent Technologies N9360A Programming Manual page 181

N9360A Multi UE Tester CDMA2000 Programming Manual
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging
from -40.0 to 0.0 in dB. If measurement result is out of
range or Code Domain Power Pilot is not measured, the value
99.9 is returned.
Code Domain Power Traffic (Fundamental) Measurement
TESTs:MANual:RESults:CDPWr:TFUNDamental?
This query command is valid when CDMA mode is set to MC1X.
This returns the Code Domain Power Traffic (Fundamental) CH
Measurement result values, <int 1>, <int 2>, and <real 3>.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Code Domain Power Traffic (Fundamental) CH is
not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging
from -40.0 to 0.0 in dB. If measurement result is out of
range or Code Domain Power Traffic (Fundamental) CH is
not measured, the value 99.9 is returned.
Code Domain Power RRI Measurement
TESTs:MANual:RESults:CDPWr:RRI?
This command requires the installation of the Option C02.
This query command is valid when CDMA mode is set to EVDO.
This returns the RRI measurement result values, <int 1>,
<int 2>, and <real 3> on the [Code Domain Power]
measurement screen.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Code Domain Power is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging
from -40.0 to 0.0 in dB. If measurement result is out of
range or Code Domain Power is not measured, the value
99.9 is returned.
Programming Command Reference
5
5-131