5
Programming Command Reference
5-112
Network ID
TESTs:MANual:NID <int>
TESTs:MANual:NID?
This command is vaild when CDMA mode is set to MC1X. This
sets the Network ID of the Base Station Parameters in each
band set by the
Band
is from 0 to 65535 in 1step. At preset, this is set to 1.
This query command returns the setting of the Network ID with
integer. The allowable range of the return value is same as that
of the command parameter.
System ID
TESTs:MANual:SID <int>
TESTs:MANual:SID?
This command is vaild when CDMA mode is set to MC1X. This
sets the System ID of the Base Station Parameters in each band
set by the
Band
command on
from 0 to 32767 in 1step. At preset, this is set to 7.
This query command returns the setting of the System ID with
integer. The allowable range of the return value is same as that
of the command parameter.
Network ID (for Zone-based Registration)
TESTs:MANual:RNID <int>
TESTs:MANual:RNID?
This command is vaild when CDMA mode is set to MC1X. This
sets the Network ID (for Zone-based Registration) of the Base
Station Parameters in each band set by the
36. The allowable range is from 0 to 65535 in 1step. At
page
preset, this is set to 12.
This query command returns the setting of the System ID with
integer. The allowable range of the return value is same as that
of the command parameter.
N9360A Multi UE Tester CDMA2000 Programming Manual
command on
page
36. The allowable range
page
36. The allowable range is
Band
command on