Agilent Technologies N9360A Programming Manual page 191

Table 5-26 Modulation Allowable Range and Preset Value
Option Screen Display
Display?
C02 TXAN:CDPW, 0
installed (MC1X)
(continued) (Code Domain
Power
measurement
screen is displayed
in MC1X.)
TXAN:CDPW, 0
(EVDO)
(Code Domain
Power
measurement
screen is displayed
in EVDO.)
N9360A Multi UE Tester CDMA2000 Programming Manual
<enum 1>
Allowable
Range
PILOTONLY,
PILOT+SYNC+PCH+OCNS+FCH,
PILOT+SYNC+PCH+OCNS+FCH+SCH
CONTPILOT, PILOT+MAC+CNTRL
PILOT+MAC+CNTRL+TCH
This is automatically set to PILOTONLY when the screen is
changed to the [TX Analyzer] screen while Modulation on the
[Signal Generator] screen is set to OFF. (There is no OFF setting
in TX Analyzer.)
This query command returns the set Modulation mode and
method.
Subtype
TXANalyzer:SUBType 0|2
TXANalyzer:SUBType?
The command is valid when PILOT+MAC+CNTRL+TCH is set by
the Modulation command and 3 or 4 (Release A) is set by the
3GPP2 Configuration command. This sets subtype 0 or 2. At
preset, this is set to 0.
Programming Command Reference
<enum 2> <enum 1>
Allowable Range PRESET
Range
— PILOTONLY
— PILOTONLY
QPSK, 8PSK, PILOTONLY
16QAM
5
<enum 2>
PRESET
Range
—
—
—
5-141