Agilent Technologies N9360A Programming Manual page 148
Multi ue tester
Hide thumbs
Also See for N9360A:
- Programming manual (352 pages) ,
- Installation manual (46 pages) ,
- Quick reference manual (44 pages)
Table of Contents
Advertisement
5
Programming Command Reference
5-98
TESTs:AUTO:RESults:SENSitivity:PER14?
TESTs:AUTO:RESults:SENSitivity:PER15?
TESTs:AUTO:RESults:SENSitivity:PER16?
This command requires the installation of the Option C02.
These query commands are valid when CDMA mode is set to
EVDO. They return the Sensitivity/PER1 Measurement result
values, <int 1>, <int 2> and <real 3> for each channels.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Sensitivity/PER1 is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from 0.00 to 100.00. If measurement result is out of range
or Sensitivity/PER1 is not measured, the value 999.99 is
returned.
Sensitivity/PER2 Measurement
TESTs:AUTO:RESults:SENSitivity:PER21?
TESTs:AUTO:RESults:SENSitivity:PER22?
TESTs:AUTO:RESults:SENSitivity:PER23?
TESTs:AUTO:RESults:SENSitivity:PER24?
TESTs:AUTO:RESults:SENSitivity:PER25?
TESTs:AUTO:RESults:SENSitivity:PER26?
This command requires the installation of the Option C02.
These query commands are valid when CDMA mode is set to
EVDO. They return the Sensitivity/PER2 Measurement result
values, <int 1>, <int 2> and <real 3> for each channels.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Sensitivity/PER2 is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from 0.00 to 100.00. If measurement result is out of range
or Sensitivity/PER2 is not measured, the value 999.99 is
returned.
N9360A Multi UE Tester CDMA2000 Programming Manual
Advertisement
Table of Contents
