Agilent Technologies N9360A Programming Manual page 124

5
Programming Command Reference
5-74
Sensitivity/PER Test 2 (Off)
CONFigure:CONDition:LIMit:SENSitivity:PER2:<<
Off <real HI>
CONFigure:CONDition:LIMit:SENSitivity:PER2:Off?
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
specifies the high limit for Sensitivity/PER Test 2 (Off) test in each
band set by the Band
is from 0.00 to 100.00 (%) in 0.01 steps. At preset, this is set
to 0.50 (%).
This query command returns the set high limit of Sensitivity/PER
Test 2 (Off) test with real. The range of the value is same as that
of the command parameter.
Sensitivity/PER Test 3 (95%)
CONFigure:CONDition:LIMit:SENSitivity:PER3:<<
95 <real HI>
CONFigure:CONDition:LIMit:SENSitivity:PER3:95?
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
specifies the high limit for Sensitivity/PER Test 3 (95%) test in
each band set by the Band
range is from 0.0 to 5.0 (%) in 0.5 steps. At preset, this is set
to 0.5 (%).
This query command returns the set high limit of Sensitivity/PER
Test 3 (95%) test with real. The range of the value is same as that
of the command parameter.
N9360A Multi UE Tester CDMA2000 Programming Manual
command on page 36. The allowable range
command on page 36. The allowable