Agilent Technologies N9360A Programming Manual page 163

5
Programming Command Reference
System ID (for Zone-based Registration)
TESTs:MANual:RSID <int>
TESTs:MANual:RSID?
This command is vaild when CDMA mode is set to MC1X. This
sets the System ID (for Zone-based Registration) of the Base
Station Parameters in each band set by the Band command on
36. The allowable range is from 0 to 32767 in 1step. At
page
preset, this is set to 12.
This query command returns the setting of the System ID with
integer. The allowable range of the return value is same as that
of the command parameter.
TX Power
TESTs:MANual:TXPower:STATe ON|OFF|1|0
TESTs:MANual:TXPower:STATe?
This command sets whether to execute the Peak TX Power test.
The parameter is ON (1) or OFF (0). At preset, this is set to 1.
This query command returns the setting of the TX Power test
with integer value of 1 or 0. The meaning of the return value is
same as that of the command parameter.
Frequency Error
TESTs:MANual:FERRor:STATe ON|OFF|1|0
TESTs:MANual:FERRor:STATe?
This command sets whether to execute the Frequency Error test.
The parameter is ON (1) or OFF (0). At preset, this is set to 1.
This query command returns the setting of the Frequency Error
test with integer value of 1 or 0. The meaning of the return
value is same as that of the command parameter.
N9360A Multi UE Tester CDMA2000 Programming Manual 5-113