Agilent Technologies N9360A Programming Manual page 165

5
Programming Command Reference
Sensitivity/PER
TESTs:MANual:PER:STATe ON|OFF|1|0
TESTs:MANual:PER:STATe?
This command requires the installation of the Option C02.
This command is valid when CDMA mode is set to EVDO. This
sets whether to execute the Sensitivity/PER test. The parameter
is ON (1) or OFF (0). At preset, this is set to 1.
This query command returns the setting of the Sensitivity /PER
test with integer value of 1 or 0. The meaning of the return
value is same as that of the command parameter.
Time Offset
TESTs:MANual:TOFFset:STATe ON|OFF|1|0
TESTs:MANual:TOFFset:STATe?
This command sets whether to execute the Time Offset test. The
parameter is ON (1) or OFF (0). At preset, this is set to 1.
This query command returns the setting of the Time Offset test
with integer value of 1 or 0. The meaning of the return value is
same as that of the command parameter.
Code Domain Power (TX Power)
TESTs:MANual:CDPWr:TXPower:STATe?
This query command returns the settings (execution or
inexecution) of the Code Domain Power (TX Power) test. Only
query is available since the settings is fixed to ON when either
measurement item other than TX Power is set to ON and fixed to
OFF when all measurement items other than TX Power are set to
OFF, regarding ON/OFF setting of Code Domain Power (TX Power).
N9360A Multi UE Tester CDMA2000 Programming Manual 5-115