Agilent Technologies N9360A Programming Manual page 144

5
Programming Command Reference
5-94
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Max TX Power is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from -99.99 to +99.99 in dBm. If measurement result is
out of range or Max TX Power is not measured, the value
-99.99 is returned.
Min TX Power Measurement
TESTs:AUTO:RESults:TPOWer:MINimum1?
TESTs:AUTO:RESults:TPOWer:MINimum2?
TESTs:AUTO:RESults:TPOWer:MINimum3?
TESTs:AUTO:RESults:TPOWer:MINimum4?
TESTs:AUTO:RESults:TPOWer:MINimum5?
TESTs:AUTO:RESults:TPOWer:MINimum6?
These query commands return the Min TX Power measurement
result values, <int 1>, <int 2> and <real 3> for each
channel.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Min TX Power is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 6 letters) is the measured data ranging
from -99.99 to +99.99 in dBm. If measurement result is
out of range or Min TX Power is not measured, the value
-99.99 is returned.
N9360A Multi UE Tester CDMA2000 Programming Manual