5
Programming Command Reference
5-136
Code Domain Power DSC (EXPand) Measurement
TESTs:MANual:RESults:CDPWr:DSC:EXPand?
This command requires the installation of the Option C02.
This query command is valid when CDMA mode is set to EVDO
and 3GPP2 Config is set to 3 or 4 (1xEV-DO Revision A). This
returns the DSC CH measurement result values, <int 1>, <int 2>,
<real 3> and <real 4> on the [Code Domain Power]
measurement screen.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Code Domain Power is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging from
-40.0 to 0.0 in dB. If measurement result is out of range or
Code Domain Power is not measured, the value 99.9 is
returned.
• <real 4> (up to 5 letters) is the measured data (relative level
to Pilot CH) ranging from -40.0 to 0.0 in dB. If
measurement result is out of range or Code Domain Power is
not measured, the value 99.9 is returned.
Code Domain Power Max Inactive Channel Measurement
TESTs:MANual:RESults:CDPWr:MAXINActivechannel?
This query command returns the Max Inactive Channel result
values, <int 1>, <int 2>, and <real 3> on the [Code Domain
Power] measurement screen.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or Code Domain Power is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
(Judgment of limit value is not executed.)
• <real 3> (up to 5 letters) is the measured data ranging from
-40.0 to 0.0 in dB. If measurement result is out of range or
Code Domain Power is not measured, the value 99.9 is
returned.
N9360A Multi UE Tester CDMA2000 Programming Manual