Agilent Technologies N9360A Programming Manual page 130

5
Programming Command Reference
5-80
This query command returns the set the number of the setup
files. The range of the value is same as that of the command
parameter.
Files List Number
CONFigure:FILE:LIST:NUMber?
This query command returns the total number of setup files.
List Files
CONFigure:FILE:LIST?
This query command returns a list of all setup files in the HDD
or a USB memory device. The return format is <int TOTAL>,
<into FILENO_1>, <string FILENAME_1>, <string
DATE_1>, <string TIME_1>, <string COMMENT_1>, ... ,
<int FILENUMBER_n>, <string FILENAME_n>, <string
DATE_n>, <string TIME_n>, and <string COMMENT_n>.
Both FILENAME and COMMENT are double quoted strings.
When this command is received through GPIB, execution error
occurs if the E02 option is valid.
<int TOTAL> (3 letters) is the total number of setup files
•
in the HDD or a USB memory device ranging from 000 to
100.
<int FILENO_n> (3 letters) is the n-th file number
•
ranging from 001 to 100.
<string FILENAME_n> (8 letters) is the file name of the
•
n-th file.
<string DATE_n> (10 letters) is the date in yyyy/mm/dd
•
format stored of the n-th file.
<string TIME_n> (5 letters) is the time in hh:mm
•
format stored in the n-th file.
<string COMMENT_n> (23 letters) is the comment of the
•
n-th file.
n ranges from 1 to the last number of the files in the HDD or a
USB memory device.
File List Short
CONFigure:FILE:LIST:SHOrt?
N9360A Multi UE Tester CDMA2000 Programming Manual