Agilent Technologies N9360A Programming Manual page 103

5
Programming Command Reference
This command sets whether to include the Softer Handoff in a test
flow. The parameter is ON (1) for Run or OFF (0) for --- (skip). At
preset, this is set to 1.
This query command returns the setting of Softer Handoff with
integer value of 1 or 0. The meaning of the return value is same
as that of the command parameter.
BS Release (Talk)
CONFigure:SEQuence:SIGNaling:REL:TALK REL|HO
CONFigure:SEQuence:SIGNaling:REL:TALK?
This command is valid when CDMA mode is set to MC1X. This
sets whether to include the BS Release (Talk) in a test flow. The
parameter is REL for BS Release or HO for Handover. At preset,
this is set to REL.
This query command returns the setting value with strings of
REL or HO.
BS Release (RF Test)
CONFigure:SEQuence:SIGNaling:REL:RFTEST REL|HO
CONFigure:SEQuence:SIGNaling:REL:RFTEST?
This command is valid when CDMA mode is set to MC1X. This
sets whether to include the BS Release (RF Test) in a test flow.
The parameter is REL for BS Release or HO for Handover. At
preset, this is set to REL.
This query command returns the setting value with strings of
REL or HO.
N9360A Multi UE Tester CDMA2000 Programming Manual 5-53