Connecting To A Bluetooth-Compatible Device Fails (Headset Profile) - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.5 About Headset Profile (HSP Connection/ HSP Disconnection)
Behavior of the Transceiver When Connecting to a Bluetooth-compatible Device
Fails (Headset Profile)
If connection to a Bluetooth-compatible device fails by Headset Profile, the transceiver behaves as follows:
Table 10-9 Behavior of the Transceiver When Connecting to a Bluetooth-compatible Device Fails
Status
If connection to a Bluetooth-compatible device is started using Bluetooth My Devices Mode or the
When the Bluetooth-
Bluetooth Connect / Disconnect key, the transceiver checks whether the Bluetooth-compatible
compatible device
device supports Headset Profile. If the Bluetooth-compatible device does not support Headset
does not support
Profile, the connection process ends. In this case, a Bluetooth No Service Tone (3 beeps) sounds
Headset Profile
from the transceiver, the LED turns Off, and "BT No Service" appears on the display for 1 sec.
The connection process ends in one of the following conditions. In this case, a Bluetooth No
Response Tone (1 beep) sounds from the transceiver, the LED turns Off, and "No Response"
When nothing can be
appears on the display for 1 sec.
received from the
Bluetooth-compatible
0
device
0
The connection process ends in one of the following conditions. In this case, a Bluetooth Connect
Denied Tone (2 beeps) sounds from the transceiver, the LED turns Off, and "Connect Denied"
When the Bluetooth-
appears on the display for 1 sec.
compatible device
rejects the connection
0
request.
0
Common FUNC (K, F)/Ver 2.20
The transceiver starts connection to the Bluetooth-compatible device, and the Bluetooth-
compatible device does not respond even if about 10 sec elapse.
The transceiver moves outside the Bluetooth operation range during the connection process.
The connection request is rejected by the Bluetooth-compatible device.
120 sec elapse without the Bluetooth-compatible device operating to start connection after a
Ring Tone sounds from the Bluetooth-compatible device.
Transceiver Behavior
CONTENTS
201
INDEX