Removing A Control Head - Kenwood NX-5000 Series Common Function Reference

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.4 Removing an RF Deck/ Control Head
17.4 Removing an RF Deck/ Control Head
The system structure can be changed by removing the Control Heads and RF Decks in a system that is operating.

Removing a Control Head

This section describes the procedure to change a system to a Triple RF Deck/ Single Control Head structure by removing
a Control Head from the system of a Triple RF Deck/ Dual Control Head structure.
Note
A Control Head can be removed with the same procedure when removing the Control Head in a system of the following
RF Deck/ Control Head structures:
Dual RF Deck/ Dual Control Head
0
Single RF Deck/ Dual Control Head
0
1
Turn OFF all RF Decks and Control Heads.
If either Control Head is turned OFF, all RF Decks and Control Heads are turned OFF.
Common FUNC (K, F)/Ver 2.20
Deck 1
RF
KRK-15B
Control Head
1
Figure 17-45 Triple RF Deck/ Dual Control Head (Power OFF)
RF Deck 2
KRK-15B
Power OFF
Deck 3
RF
KRK-15B
Control Head
2
CONTENTS INDEX
360