Kenwood NX-5000 Series Common Function Reference page 206

9 STORING RECORDED AUDIO/ GPS DATA
9.6 Confirming microSD Card Contents via a PC (SD Card Direct Access)
2
Press the [ ] or [
A Key Beep A (1 beep) sounds from the transceiver, and the
SD card slots that can be selected appear.
Note
In a Multi RF Deck/ Multi Control Head structure or in a
Single RF Deck/ Single Control Head structure using
KCH-20R, multiple SD card slots exist.
3
Press the [ ] key or
A Key Beep A (1 beep) sounds from the transceiver, and a
caution message appears.
4
Press the Menu ([
A Key Beep A (1 beep) sounds from the transceiver, and then
the transceiver enters SD Card Direct Access Mode.
If a microSD card is inserted in the selected SD card slot, the
" " icon appears.
Note
If the transceiver is turned OFF or the KPG-36X/ KPG-46X programming cable is removed, the transceiver exits SD Card
0
Direct Access Mode. However, if the transceiver is turned OFF or the KPG-36X/ KPG-46X programming cable is removed
while an audio file in the microSD card is being read by the PC, the data in the microSD card may be damaged. When
exiting SD Card Direct Access Mode, execute the operation to remove the mass storage device on the Tray of Windows
on the PC in advance.
Do not format the microSD card on the PC. If the microSD card is formatted on the PC, each function of Auto
0
Recording, Voice Memo, and GPS Data Storage may not function properly.
Configuration using KPG-D1/ D1N
Configuring SD Card Direct Access to be enabled or disabled (
Features 1 > Mode)
Common FUNC (K, F)/Ver 2.20
] key to select "Start", and then press the
[ ] key to select an SD card slot, and then press the
]) or [*] key.
Menu ([ ]) or [*] key.
SD Access
Deck 1
Deck 2
Deck 3
Head 1
OK
Menu ([
SD Access
Extended Access
Time Required.
OK
SD Access
Transceiver Settings > Optional Features > Optional
CONTENTS
12 : 34 A
M
1
]) or [ ] key.
A
12 : 34
M
175
INDEX