Kenwood NX-5000 Series Common Function Reference page 260

12 FUNCTIONS LINKED TO A VEHICLE
12.2 Controlling Vehicle Operation According to the State of the Horn Alert Port (Horn Alert)
Operating the transceiver
0
Enabling the Horn Alert
1
Press the Horn Alert
Horn Alert is enabled, and then the "
0
Disabling the Horn Alert
1
Press the Horn Alert
Horn Alert is disabled, and then the "
Note
The Horn Alert port functions according to the configuration in Horn Alert Logic Signal. (Refer to
0
Signal.)
While the state of the Ignition Sense port is at high level, the Horn Alert port is not activate even if the transceiver receives
0
a call.
(Refer to Turning the Transceiver ON or OFF According to the State of the Ignition Sense Port (Ignition
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Common FUNC (K, F)/Ver 2.20
key while Horn Alert is disabled.
" icon appears.
key while Horn Alert is enabled.
" icon disappears.
C h a n n e l 1
M en u
C h a n n e l 1
M en u
Transceiver Settings > Key Assignment)
CONTENTS
12 : 34 A
M
Z o n e 1
H A Z on e- Z on e +
12 : 34 A
M
Z o n e 1
H A Z o ne - Z on e +
Horn Alert Logic
Sense).)
229
INDEX