Kenwood NX-5000 Series Common Function Reference page 35

1 FUNCTIONS AND PANEL LAYOUT
1.2 NX-5700/ NX-5800/ NX-5900
KCH-20R (Featured Panel)
8
9
0
Figure 1-3 NX-5700/ NX-5800 Front View (KCH-20R (Featured Panel))
A
[P] (Power) Switch
The transceiver is turned ON when this switch is pressed
and the transceiver is turned OFF when this switch is
pressed again. In this manual, the [P] (Power) switch is
described as the Power switch.
[+]/ [-] Key
B
The preassigned function will be activated or will be
changed to the active state.
LCD
C
The channel number and the transceiver's status appear
on this display.
D
[E]/ [F] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
E
[G]/ [H] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
[A]/ [B]/ [C] Key
F
The preassigned function will be activated or will be
changed to the active state.
AUX Key
G
The preassigned function will be activated or will be
changed to the active state.
Illumination Sensor
H
The sensor is for automatically adjusting the luminance
of the LCD depending on the brightness of the
environment.
Common FUNC (K, F)/Ver 2.20
1 2
a b c
3 4 5
d e f g
Transmit LED
I
This LED lights when the transceiver transmits a signal.
Busy/ Status LED
J
This LED lights or flashes according to the status, such
as while the transceiver is receiving a signal, and when
the transceiver receives a call.
K
[T] (Home) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [T]
(Home) key is described as the Home ([T]) key.
L
[Q] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [Q]
(Menu) key is described as the Menu ([Q]) key.
The default of the [Q] (Menu) key is the Menu function.
If the configuration is changed using KPG-D1/ D1N, a
newly configured function will be activated. Unless the
Menu function is reassigned to the [Q] (Menu) key, Menu
Mode cannot be activated even if the [Q] (Menu) key is
pressed.
M
[O] (Back) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [O]
(Back) key is described as the Back ([O]) key.
N
[d]/ [c] Key
The preassigned function will be activated or will be
changed to the active state.
CONTENTS
6 7
h
INDEX
4