Kenwood NX-5000 Series Common Function Reference page 124

Hide thumbs Also See for NX-5000 Series:
Table of Contents

Advertisement

5 INDICATION AND DISPLAY
5.6 Changing the Brightness of the Backlight (LCD Brightness)
5.6
Changing the Brightness of the Backlight (LCD Brightness)
The transceiver can be used in dark places or at night by obscuring the brightness of the backlight.
The brightness of the backlight can be configured in LCD Brightness by using KPG-D1/ D1N. This configuration can be
changed by operating the transceiver.
0
LCD Brightness key
Pressing the LCD Brightness key gradates the brightness of the backlight as follows:
Portable:
High N Medium N Low N High ...
Mobile (KCH-19 (Basic Panel)/ KCH-20R (Featured Panel)):
Level 7 N Level 6 N Level 5 N Level 4 N Level 3 N Level 2 N Level 1 N Level 7 ...
Mobile (KCH-21R (Handheld Control Head)):
Level 7 N Level 6 N Level 5 N Level 4 N Level 3 N Level 2 N Level 1 N Off N Level 7 ...
0
Menu key
Pressing the Menu key to enter Menu Mode, the brightness can be changed by executing "LCD Brightness" and then
selecting the backlight brightness from the selections.
Portable:
High, Medium, Low
Mobile (KCH-19 (Basic Panel)/ KCH-20R (Featured Panel)):
Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7
Mobile (KCH-21R (Handheld Control Head)):
Off, Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7
Status of the backlight's brightness that was changed is retained even after the transceiver is turned OFF.
Note
In a Dual Control Head structure, the changed configuration is applied to the Control Head for which the configuration of
LCD Brightness is changed. Also, LCD Brightness can be configured for each Control Head by using KPG-D1/ D1N.
The configuration in LCD Brightness applies to Control Head 1, and the configuration in LCD Brightness for Control
Head 2 applies to Control Head 2.
Configuration using KPG-D1/ D1N
0
Configuring LCD Brightness (
0
Configuring LCD Brightness for Control Head 2 (
1 > Display)
0
Assigning functions to the PF keys on the transceiver (
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional Features 1 > Display)
Transceiver Settings > Optional Features > Optional Features
Transceiver Settings > Key Assignment)
CONTENTS
INDEX
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5400Nx-5800Nx-5200Nx-5700Nx-5900Nx-5300

Table of Contents