Kenwood NX-5000 Series Common Function Reference page 335

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.16 Bluetooth Communication
If "RF Deck" is configured in Bluetooth Interface Selection:
Out of Bluetooth-compatible devices equipped in each RF Deck, which device to be used can be configured. In a Triple RF
Deck structure, devices equipped in all RF Decks can be used. Using only a device equipped in a single RF Deck is also
possible. In this case, activating all devices is recommended because the connection to a Bluetooth-compatible device of
each RF Deck becomes possible.
If "Control Head" is configured in Bluetooth Interface Selection:
A Bluetooth-compatible device equipped in KCH-20R can be used. In a Dual Control Head structure, Bluetooth-compatible
devices of all Control Heads can be used. A Bluetooth-compatible device of each Control Head cannot be individually
configured. Two Control Heads always become available at a time.
The following Bluetooth basic functions work differently between when "RF Deck" is configured and when "Control Head"
is configured in Bluetooth Interface Selection.
1. Bluetooth On/Off
2. Bluetooth Find Device
3. Bluetooth Device Name
4. Bluetooth Information
5. Pairing
6. Bluetooth My Devices
7. VOX
8. Bluetooth Speaker
The following describes how each function works.
Common FUNC (K, F)/Ver 2.20
Figure 16-67 Bluetooth Interface Selection
CONTENTS INDEX
304