Kenwood NX-5000 Series Common Function Reference page 268

14
14 ADJUSTING THE TIME ON THE TRANSCEIVER
ADJUSTING THE TIME ON THE TRANSCEIVER
The transceiver is equipped with an internal clock IC. Using the internal clock IC, the current time can be displayed on the
display.
14.1 Displaying the Current Time
Pressing the Clock key displays the current time on the display.
The current time also appears when "Clock" is selected after entering Menu Mode by pressing the Menu key. (Refer to
Using Menu Mode.)
Operating the transceiver
1
Press the Clock key.
The current time appears.
Note
If Clock Display is enabled, the current time appears on the display when the transceiver is turned ON.
0
The transceiver is equipped with a separate battery for the clock IC. If the second rechargeable battery runs out, the clock
0
will not be displayed properly. Recharge the battery and then configure the clock again. In this case, "- - : - -" appears.
Configuration using KPG-D1/ D1N
0
Assigning functions to the PF keys on the transceiver (
0
Configuring Clock Display (
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Key Assignment)
Transceiver Settings > Optional Features > Optional Features 1 > Display)
0
12H Display
Z o n e 1
C h a n n e l 1
M en u Zo ne+
0
24H Display
Z o n e 1
C h a n n e l 1
M en u Zo ne+
CONTENTS INDEX
12 : 34 A
M
12 : 34
237