Communication Ports - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.8 Inhibiting Transceiver Behaviors by Remote Control (Inhibit/ Stun)
Note
In Multi RF Deck operation, when RF Decks are in the Inhibit/ Stun state, if one of the RF Decks is replaced with an RF
Deck that is not in the Inhibit/ Stun state, the RF Deck that is not in the Inhibit/ Stun state enters the Inhibit/ Stun state.
However, if an RF Deck is removed from the Multi RF Deck operation, the Inhibit/ Stun state of the RF Deck is reset.
16.9

Communication Ports

In a Multi RF Deck/ Multi Control Head structure, COM 1 and COM 2 can be configured for each RF Deck, and the
communication ports of each RF Deck behave individually according to the configuration for the RF Deck with a serial cable
connection, regardless of whether the RF Deck is the Selected RF Deck or not. (Refer to
Port.)
The following figure shows an example of when COM ports are configured for RF Decks:
Note
"GPS" can be configured in Function of COM port 1 and COM port 2 of RF Deck 1.
Common FUNC (K, F)/Ver 2.20
Figure 16-58 COM port
Available Functions for COM
CONTENTS INDEX
296