Kenwood NX-5000 Series Common Function Reference page 362

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.18 Relaying the Received Signal (Mobile Relay Station)
2
After slipping the heat shrink tubing on each cable, solder each cable to the D-sub 25-pin connector.
Solder according to the wiring diagram of
3
Cover the soldered parts with the heat shrink tubing, and heat shrink with the hot air.
Common FUNC (K, F)/Ver 2.20
"Connecting the RF Deck by Using a D-sub 25-pin
Figure 16-90 Cable Connection 1
Figure 16-91 Cable Connection 2
Cable".
CONTENTS INDEX
331