Kenwood NX-5000 Series Common Function Reference page 431

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Analog Conventional:
The transceiver enters Selcall Mode of FleetSync or of MDC-1200.
Pressing the [F] key while the transceiver is in Selcall Mode of FleetSync
places the transceiver in Short Message Mode.
Even if the [F] key is pressed while the transceiver is in Selcall Mode of
MDC-1200, the transceiver does not respond at all.
P25 Conventional:
Enters Individual Call Mode in a P25 system. In Individual Call Mode, a call
can be initiated by selecting a Unit ID registered in the Individual ID List or by
Individual + Short
directly entering a Unit ID.
Message
NXDN system/ DMR Conventional:
Enters Individual Call Mode in an NXDN system or DMR Conventional. In
Individual Call Mode, a call can be initiated by selecting a Unit ID registered
in the Individual ID List or by directly entering a Unit ID. Then, pressing the [F]
key while the transceiver is in Individual Call Mode allows the transceiver to
enter Short Message Mode. In Short Message Mode, a Short Message can
be sent by directly entering a Short Message.
See
NXDN FUNC
Analog Conventional:
The transceiver enters Selcall Mode of FleetSync or of MDC-1200.
Pressing the [F] key while the transceiver is in Selcall Mode of FleetSync
places the transceiver in Status Mode.
Even if the [F] key is pressed while the transceiver is in Selcall Mode of
MDC-1200, the transceiver does not respond at all.
P25 Conventional:
Enters Individual Call Mode in a P25 system. In Individual Call Mode, a call
can be initiated by selecting a Unit ID registered in the Individual ID List or by
Individual + Status
directly entering a Unit ID.
NXDN system/ DMR Conventional:
Enters Individual Call Mode in an NXDN system or DMR Conventional. In
Individual Call Mode, a call can be initiated by selecting a Unit ID registered
in the Individual ID List or by directly entering a Unit ID. Then, pressing the [F]
key while the transceiver is in Individual Call Mode allows the transceiver to
enter Status Mode. In Status Mode, a Status Message can be sent by selecting
a status configured in NXDN Status List or by directly entering a status number.
See
NXDN FUNC
The communication between Control Head 1 and Control Head 2 can be
toggled between enabled and disabled.
Intercom (Mobile
only)
Note
This function can be used only in a Dual Control Head structure of Mobile.
Enters Key Delete Mode. In Key Delete Mode, an Encryption Key can be
selected and then deleted.
See
Key Delete
P25 FUNC
0
NXDN FUNC
0
DMR FUNC
0
Common FUNC (K, F)/Ver 2.20
Description
Sending and Receiving a Short Message (Short Data Call)
Sending and Receiving a Status Message (Status Call)
Deleting the Encryption Key (Key Delete)
Deleting the Encryption Key (Key Delete)
Deleting the Encryption Key (Key Delete)
Available
Communication
Systems
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
NXDN Trunking
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
NXDN Trunking
ALL
ALL
CONTENTS INDEX
*1
400