About The Audio To Be Recorded - Kenwood NX-5000 Series Common Function Reference

9 STORING RECORDED AUDIO/ GPS DATA
9.3 Recording Audio to a microSD Card (Voice Memo)
If 10 minutes elapse after recording starts and the transceiver exits Voice Memo Mode, a Record Stopped Tone (4 beeps)
sounds from the transceiver, and "Record Stopped" appears on the display for 2 sec.
Note
Recording does not start if the conditions for storing data in the microSD card are not satisfied. (Refer to
0
enables audio data file and GPS data file to be stored in a microSD
Voice Memo records audio to the microSD card. Therefore, while recognition of the microSD card is not completed, while
0
the microSD card is formatted, or while an audio file is deleted, a Key-entry Error Tone (1 beep) sounds from the
transceiver and recording does not start even if the Voice Memo key is pressed.
The maximum length of recording time is 10 minutes.
0
Mode Reset Timer is extended while the transceiver is in Voice Memo Mode. Also, the VOX function is temporarily
0
disabled.
If the transceiver receives a request message for GPS data by using wireless communication while in Voice Memo Mode,
0
the transceiver sends the GPS data to the base station after the transceiver exits Voice Memo Mode. (Refer to
the GPS Data (GPS Data
If Voice Memo is used with other functions such as GPS Data Storage, the beginning may be missing from the audio
0
recorded by Voice Memo.

About the Audio to Be Recorded

The following audio is recorded while the transceiver is in Voice Memo Mode.
Portable:
If a speaker microphone (such as KMC-54WD) is connected to the transceiver, the audio inputted to the microphone of
the speaker microphone is recorded. If a speaker microphone is not connected, the audio inputted to the microphone of
the transceiver is recorded.
Mobile:
The audio inputted to the Mic Line is recorded.
Note
The inputted audio is recorded even if a Bluetooth-compatible headset is connected to the transceiver.
0
For Mobile, the audio path of the Mic Line changes according to the configuration in Control Head Mic Input. (Refer to
0
Selecting the Audio Input Line If Detaching and Using Control Head (Control Head Mic
Common FUNC (K, F)/Ver 2.20
Z o n e 1
C h a n n e l 1
R e c o r d S t o p p e d
Me nu
Storage).)
12 : 34
A
M
Z on e+
card.)
CONTENTS
Conditions that
Storing
Input).)
INDEX
165