Transmission/ Reception - Kenwood NX-5000 Series Common Function Reference

4

4 TRANSMISSION/ RECEPTION

TRANSMISSION/ RECEPTION
4.1 Transmit/ Receive Frequencies
Transmit and receive frequencies are pairs of frequencies used for transmitting and receiving.
In Analog Conventional, P25 Conventional, NXDN Conventional, and DMR Conventional systems, transmit and receive
frequencies can be configured for each channel (Personality).
In a P25 Trunking system, transmit and receive frequencies to be used for communication with a repeater structuring the
P25 Trunking system can be configured in the Trunked Channel Plan table of the P25 Trunking system.
In an NXDN Trunking system, transmit and receive frequencies to be used for communication with a repeater structuring
the NXDN Trunking system can be configured in the Frequency Table of the NXDN Trunking system.
Model
NX-5200/ NX-5700
NX-5300/ NX-5800
NX-5400/ NX-5900
Configuration using KPG-D1/ D1N
0
Configuring the transmit and receive frequencies for a channel (
0
Configuring the transmit and receive frequencies in the Trunked Channel Plan table of a P25 Trunking system (
Transceiver Settings > P25 Network > Trunked Channel Plan)
0
Configuring the transmit and receive frequencies in the Frequency Table of an NXDN Trunking system (
Transceiver Settings > NXDN Network > Frequency Table)
4.2 Transmit Power
Transmit Power is the transmission power of the transceiver. A user can use the transceiver by switching the transmission
power to high power, medium power or low power.
If the transceiver is located near repeaters or target party, a user can change the transmission power to low power in order
to avoid causing unnecessary radio interference to other transceivers. Also, for Portable, the battery operating time of the
transceiver is extended by reducing power consumption.
Medium power can be adjust as desired between low power and high power. The transmission power can be switched
among 3 levels and used by adjusting medium power.
Model
Low
NX-5200 1 W
NX-5300
1 W
NX-5400 1 W
NX-5700
5 W
NX-5800
5 W
NX-5900 2 W
*1 The default value is the same value as low power.
Common FUNC (K, F)/Ver 2.20
Table 4-1 Transmit/ Receive Frequency Range and Step Size
Range
136 MHz to 174 MHz
450 MHz to 520 MHz
380 MHz to 470 MHz
763 MHz to 870 MHz
Table 4-2 Transmit Power
Medium
Depends on the adjustment
Depends on the adjustment
Depends on the adjustment
Depends on the adjustment
Depends on the adjustment
Depends on the adjustment
Transmit/ Receive Frequencies
2.5 kHz, 3.125 kHz, 5 kHz, 6.25 kHz, 7.5 kHz
3.125 kHz, 5 kHz, 6.25 kHz
6.25 kHz, 12.5 kHz
Transceiver Settings > Zone/Channel > Channel Edit)
Transmit Power
*1
*1
*1
*1
*1
If the transmit frequency is 806 MHz or lower:
*1
If the transmit frequency exceeds 806 MHz:
CONTENTS
Step
High
6 W
5 W
3 W
50 W
45 W
30 W
35 W
77
INDEX