General - Kenwood NX-5000 Series Common Function Reference

6 SOUND
6.7 Configuring Audio Profile (Audio Profile)
An audio profile used for the transceiver can be configured using KPG-D1/ D1N. Also, the audio profile to be used can be
changed in Audio Profile Mode by operating the transceiver.
Pressing the Menu key to enter Menu Mode, and then selecting "Audio Profile" places the transceiver in Audio Profile Mode.
(Refer to Using Menu Mode.)
Configuration using KPG-D1/ D1N
0
Configuring Audio Profile (
0
Configuring Audio Profile Number used for the transceiver (
Features 1 > Sound)

General

The following are the common functions of the audio profile:
Speaker Type
0
Microphone Type
0
Microphone Sense
0
External Microphone Sense
0
Digital Audio Offset
0
Speaker Type (digital channels only)
Speaker Type is the function to configure the type of external speaker to be connected to the transceiver and keep the
audio in optimum condition.
The external speakers to be connected to the transceiver have different audio characteristics. Using this function equalizes
audio characteristics that differ for each speaker, and can correct the demodulated sound when a digital signal is received.
Speaker Type
None Disables the capability to adjust audio characteristics. This configuration is used when not wanting
to change the audio characteristics.
Portable:
Internal Speaker
Mobile:
Enables the optimum audio characteristics of the following speakers:
Portable:
Speaker 1
Mobile:
Enables the optimum audio characteristics of the following speakers:
Portable:
Speaker 2
Mobile:
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Audio Profile)
Table 6-14 Speaker Type
Configuration is not available.
KCH-19 (Basic Panel)
KMC-54WD
KES-3
KMC-41, KMC-41D, KMC-42W, KMC-42WD
KES-5
Transceiver Settings > Optional Features > Optional
Description
CONTENTS
128
INDEX