Kenwood NX-5000 Series Common Function Reference page 38

1 FUNCTIONS AND PANEL LAYOUT
1.2 NX-5700/ NX-5800/ NX-5900
M
[W] (Function) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [W]
(Function) key is described as the Function ([W]) key.
N
[T] (Home) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [T]
(Home) key is described as the Home ([T]) key.
Side 1 Key
P
The preassigned function will be activated or will be
changed to the active state.
PTT Switch
Q
Pressing the PTT switch allows transmitting.
Side 2 Key
R
The preassigned function will be activated or will be
changed to the active state.
Common FUNC (K, F)/Ver 2.20
16
17
18
19
Figure 1-5 KCH-21R (Handheld Control Head) Side View
Keypad
O
The transceiver can be operated by pressing a key.
20
Side 3 Key
S
The preassigned function will be activated or will be
changed to the active state.
T [ ]/ [ ] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used for the
volume adjustment of the speaker.
CONTENTS
7
INDEX