Kenwood NX-5000 Series Common Function Reference page 80

3 BASIC OPERATIONS
3.7 Viewing the Receive History (Stack)
3.7 Viewing the Receive History (Stack)
In Stack Mode, the incoming call history (Caller ID) can be viewed. In an analog system (FleetSync/ MDC-1200/ 5-tone),
an NXDN system, or a DMR Conventional system, in addition to the incoming call history, received Status Messages and
Short Messages can be viewed in Stack Mode. Received IDs and messages are stored in the stack memory of the
transceiver.
In order to store the received IDs and various messages in the stack memory of the transceiver, Caller ID Stack, Status
Message Stack, or Short Message Stack needs to be individually enabled by using KPG-D1/ D1N.
The " " icon appears if messages are stored in the transceiver. If there is an unread message, the "
Pressing the Stack key causes the transceiver to enter Stack Mode. Or, pressing the Menu key causes the transceiver to
enter Menu Mode, and then selecting "Stack" will cause the transceiver to enter Stack Mode. (Refer to
The maximum number of stack data that can be stored
0
Caller ID/ Status Message
A maximum of 250 Caller IDs and Status Messages in total can be stored in the stack memory.
Note
Depending on the configuration of Old Message Overwrite, the stack data is deleted or stored like the following examples:
(Refer to Stack Procedure of the Receive History (Old Message
If the configuration is to automatically delete the old data:
Assume that one voice call and 249 Status Messages are stored, and that the voice call is the oldest data. In this case,
if a newly received Status Message is stored, the data of the voice call is deleted and 250 Status Messages are stored.
If the configuration is not to automatically delete the old data:
Assume that 250 Status Messages are stored. In this case, even if a new voice call is received, the voice call is not stored
because 250 Status Messages are stored.
0
Short Message
The maximum number of Short Message data that can be stored in the transceiver stack memory varies as follows
depending on the configuration of Short Message Stack in each communication protocol.
FleetSync
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Common FUNC (K, F)/Ver 2.20
Table 3-6 No. of Short Message Data That can be Stored
Short Message Stack Configuration
NXDN
Disabled Disabled
Disabled Disabled
Enabled Disabled
Enabled Disabled
Disabled Enabled
Disabled Enabled
Enabled Enabled
Enabled Enabled
Disabled Disabled
Disabled Disabled
Enabled Disabled
Enabled Disabled
Disabled Enabled
Disabled Enabled
Overwrite).)
P25 DMR
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
" icon blinks.
Using Menu
No. of Data that Can be
Saved
0
128
128
128
64
64
64
64
32
32
32
32
32
32
CONTENTS INDEX
Mode.)
49