Displaying The Signal Strength (Signal Strength Indicator) - Kenwood NX-5000 Series Common Function Reference

5 INDICATION AND DISPLAY
5.9 The Icons on the LCD
Icons
Intercom Icon
0
Appears when Intercom is enabled in a Dual Control Head structure for Mobile.
Lone Worker Icon
0
Appears when the Lone Worker is enabled.
Activity Detection Icon (Portable only)
0
Appears when the Activity Detection is enabled.
OVCM Icon
0
Appears when OVCM is enabled.
Compander Icon
0
Appears when the Compander is enabled.
OST Icon
0
Appears when the OST is enabled.
Auto Recording Icon
0
Appears while the Auto Recording is executing.
Key Lock Icon
0
Appears when the Key Lock is enabled.

Displaying the Signal Strength (Signal Strength Indicator)

5.10
Signal Strength Indicator can be used to display the signal strength of the received signal.
The RSSI icon indicating the signal strength appears in the following manner depending on the signal level of the received
signal.
Icons
Disabled
Blinking: Outside of the communication area
(P25 Trunking/ NXDN Trunking system only)
Note
The signal strength references are rough indicators of room temperature.
Configuration using KPG-D1/ D1N
Configuring Signal Strength Indicator to be enabled or disabled (
Optional Features 1 > Display)
Common FUNC (K, F)/Ver 2.20
Description
Table 5-3 Signal Strength Indicator
Status
High
Medium
Low
Very weak
No signal
Signal Strength
Above -80 dBm
-95 dBm to -80 dBm
-110 dBm to -95 dBm
With a carrier
less than -110 dBm
No carrier
-
Transceiver Settings > Optional Features >
CONTENTS INDEX
99