Selective Call Alert Led - Kenwood NX-5000 Series Common Function Reference

5 INDICATION AND DISPLAY

5.3 Selective Call Alert LED

5.3 Selective Call Alert LED
Selective Call Alert LED is used to notify a user visually that the transceiver has received various calls.
When receiving various calls, such as P25, NXDN, or DMR Individual Calls and Group Calls, the LED can flash any of the
following 7 colors, and the flashing color can be configured for each type of call:
Yellow
0
Purple
0
Blue
0
Light Blue
0
Red
0
Green
0
White
0
Configuration using KPG-D1/ D1N
0
Configuring Selective Call Alert LED in a P25 Conventional system (
Information > Conventional)
0
Configuring Selective Call Alert LED in an NXDN Conventional system (
Information > Conventional)
0
Configuring Selective Call Alert LED in a DMR Conventional system (
Information > Conventional)
0
Configuring Selective Call Alert LED in a P25 Trunking system (
> Trunking)
0
Configuring Selective Call Alert LED in an NXDN Trunking system (
Information > Trunking)
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > P25 > P25
Transceiver Settings > NXDN > NXDN
Transceiver Settings > DMR > DMR
Transceiver Settings > P25 > P25 Information
Transceiver Settings > NXDN > NXDN
CONTENTS INDEX
89