Kenwood NX-5000 Series Common Function Reference page 237

10 BLUETOOTH COMMUNICATION
10.8 Resetting the GPS/ Bluetooth Device (GPS/Bluetooth Reset)
10.8 Resetting the GPS/ Bluetooth Device (GPS/Bluetooth Reset)
GPS/Bluetooth Reset is the function to execute the hardware reset of the GPS/Bluetooth device.
By using this function, the GPS/Bluetooth device can be restored to the normal state without turning OFF the transceiver.
If the device does not function normally when the Bluetooth function is used, "BT Failure" appears on the display for 1 sec
and the transceiver enters the state where the Bluetooth function cannot be used.
If GPS/Bluetooth Reset is executed in such case, the normal status of the GPS/Bluetooth device is restored and the
Bluetooth function can be used.
Pressing the Menu key to enter Menu Mode, and then executing "GPS/Bluetooth Reset" places the transceiver in GPS/
Bluetooth Reset Mode. (Refer to
Operating the transceiver
0
Placing the transceiver in Bluetooth My Devices Mode
1
Press the Menu key to enter Menu Mode and then execute "GPS/Bluetooth Reset".
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters GPS/Bluetooth Reset Mode. (Refer to
Mode.)
2
Press the [ ] or [
A Key Beep A (1 beep) sounds from the transceiver and the hardware reset
of the GPS/Bluetooth device is executed. When the hardware reset
completes, the standby display is restored.
The screen above is an example of the display when executing the hardware reset of the GPS/Bluetooth device
during connection of a Bluetooth-compatible device by Headset Profile or while GPS positioning.
Note
If the hardware reset of the GPS/Bluetooth device is executed while GPS positioning, the GPS positioning is disabled.
0
If the hardware reset of the GPS/Bluetooth device is executed while connecting to a Bluetooth-compatible device by
0
Headset Profile, the connection is reset.
Common FUNC (K, F)/Ver 2.20
Z o n e 1
C h a n n e l 1
B T F a i l u r e
Me nu
Using Menu Mode.)
] key to select "Start", and then press the
12 : 34
A
M
Z on e+
Using Menu
Menu ([
CONTENTS
GPS/BT Reset
C a n c e l
S t a r t
O K
]) or [ ] key.
Z o n e 1
C h a n n e l 1
Menu Zone+
INDEX
12 : 34 A
M
2
Bac k
12 : 34 A
M
206