Kenwood NX-5000 Series Common Function Reference page 429

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Function Name
Analog Conventional:
The transceiver enters Selcall Mode of FleetSync or of MDC-1200.
Pressing the [F] key while the transceiver is in Selcall Mode of FleetSync
places the transceiver in Short Message Mode.
Even if the [F] key is pressed while the transceiver is in Selcall Mode of
MDC-1200, the transceiver does not respond at all.
P25 Conventional:
Enters Talkgroup ID Select Mode. In Talkgroup ID Select Mode, the Talkgroup
ID configured for a channel can be changed.
Group + Short
NXDN Conventional/ DMR Conventional:
Message
Enters Group Call Mode. In Group Call Mode, a call can be initiated by
selecting a Group ID registered in the Group ID List. Then, pressing the [F]
key while the transceiver is in Group Call Mode allows the transceiver to enter
Short Message Mode. In Short Message Mode, a Short Message can be sent
by directly entering a Short Message.
NXDN Trunking:
The transceiver enters Short Message Mode. In Short Message Mode, a Short
Message can be sent by directly entering a Short Message.
See
NXDN FUNC
Analog Conventional:
The transceiver enters Selcall Mode of FleetSync or of MDC-1200.
Pressing the [F] key while the transceiver is in Selcall Mode of FleetSync
places the transceiver in Status Mode.
Even if the [F] key is pressed while the transceiver is in Selcall Mode of
MDC-1200, the transceiver does not respond at all.
P25 Conventional:
Enters Talkgroup ID Select Mode. In Talkgroup ID Select Mode, the Talkgroup
ID configured for a channel can be changed.
NXDN Conventional/ DMR Conventional:
Group + Status
Enters Group Call Mode. In Group Call Mode, a call can be initiated by
selecting a Group ID registered in the Group ID List. Then, pressing the [F]
key while the transceiver is in Group Call Mode allows the transceiver to enter
Status Mode. In Status Mode, a Status Message can be sent by selecting a
status configured in NXDN Status List or by directly entering a status number.
NXDN Trunking:
The transceiver enters Status Mode. In Status Mode, a Status Message can
be sent by selecting a status configured in NXDN Status List or by directly
entering a status number.
See
NXDN FUNC
Common FUNC (K, F)/Ver 2.20
Description
Sending and Receiving a Short Message (Short Data Call)
Sending and Receiving a Status Message (Status Call)
Available
Communication
Systems
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
NXDN Trunking
Analog Conventional
P25 Conventional
NXDN Conventional
DMR Conventional
NXDN Trunking
CONTENTS INDEX
*1
398