Kenwood NX-5000 Series Common Function Reference page 265

TRANSCEIVER DATA PROTECTION WITH
13
13 TRANSCEIVER DATA PROTECTION WITH PASSWORD
PASSWORD
The transceiver has password functions for protecting the transceiver operation and the security of the configuration data.
13.1 Password for Transceiver Operation (Transceiver Password)
Transceiver Password protects the transceiver from unauthorized usage.
Placing the transceiver in Transceiver Password Mode prevents the transceiver from being used. The transceiver exits
Transceiver Password Mode and becomes available if a password is entered and the password is correct.
Pressing the Transceiver Password key places the transceiver in Transceiver Password Mode.
Or, pressing the Menu key places the transceiver in Menu Mode, and then selecting "Transceiver Password" places the
transceiver in Transceiver Password Mode. (Refer to
A password can be configured for the transceiver using KPG-D1/ D1N. The password can be configured using any numbers
between 0 and 999999 inclusive.
Note
If Transceiver Password is configured but no Transceiver Password is configured for the Transceiver Password and
Menu keys, the transceiver enters Transceiver Password Mode when the transceiver is turned ON.
Operating the transceiver
0
Placing the transceiver in Transceiver Password Mode
1
Press the Transceiver Password
The transceiver enters Transceiver Password Mode.
0
Exiting the Transceiver Password Mode
1
Enter a password in Transceiver Password Mode.
Refer to "Entering or Deleting a
2
Press the Menu ([
If the password matches, a Password Authorization Tone (2 beeps) sounds from the transceiver and the transceiver
enters User Mode.
Common FUNC (K, F)/Ver 2.20
Using Menu
key.
Code" for entry methods.
]) or [ ] key after entering the password.
Mode.)
CONTENTS
12 : 34 A
M
Password
Input Password
12 : 34 A
M
Password
0123
Co nfr m De let e
234
INDEX